Household demand
Showers, baths and peak use determine the storage and recovery needed. Tank size alone does not establish how a system will serve a household.
Heat pump hot water
Haier heat pumps
Select the tank and refrigerant by model.
- Model-specificProduct configuration
- Demand-ledTank sizing
- Site assessmentInstallation design
Current monoblock and split ranges
Specify recovery, storage and location together.
Haier’s current 500 Series monoblock range uses R290 refrigerant and includes nominal 200, 250 and 330 litre sizes. Haier also lists a separate 280 litre split system using R32. These are different designs, so capacity, refrigerant, sound rating and warranty must come from the model actually quoted.
Installation conditions
Airflow, service clearances, water quality, drainage and outdoor sound all matter. Use the selected model’s installation manual.
Useful controls
Timer settings can shift heating toward suitable periods. Hot-water availability and the manufacturer’s temperature and hygiene controls must remain effective.
Product details
Know what is being specified.
Current monoblock and split ranges. For a product family, the exact model and configuration are confirmed in your quote. Figures below apply only to the model or configuration identified.
| 500 Series monoblock | R290 refrigerant | Monoblock nominal sizes | 200 / 250 / 330 L |
|---|---|---|---|
| Separate 280 L split range | R32 refrigerant | Actual tank capacity | Check the model datasheet |
Manufacturer references checked 21 September 2026:
Haier HP200M1U1P 500 Series monoblock — manufacturer product image; other Haier models differ.
Warranty and support
Check the coverage for your model.
Warranty terms depend on the exact model, installation and use. We include the applicable Australian warranty documents with the quote.
The equipment
Check which components are covered, the warranty term and any registration, usage or servicing conditions.
The installation
Your quote should identify the installation work, commissioning, handover and support contacts.
The documents
Keep model and serial numbers, the invoice and the applicable Australian warranty. Manufacturer warranties sit alongside Australian Consumer Law rights.
Planning the system
Compare running costs using your conditions.
Heat-pump performance depends on outdoor temperature, incoming water temperature and the operating mode. A laboratory COP is not a guaranteed annual saving.
Current system
Compare the existing fuel, tariff, usage and any gas-supply costs that would actually be avoided.
Winter recovery
Check recovery at relevant temperatures and how any electric boost operates.
Solar timing
Consider daytime heating alongside other loads, while retaining enough hot water for later use.
Explore your wider home energy plan
Compare the options
Start with the product configuration.
These pages cover different models and product families. Compare exact quote specifications and installation scope before comparing prices.
| Brand or product | Range covered | What to confirm |
|---|---|---|
| Haier | Current monoblock and split ranges | Specify monoblock or split, the model number and the real storage volume. |
| iStore | Current R290 range | Use the current model’s refrigerant and warranty rather than an older generation’s data. |
| Reclaim | CO₂ split heat pump range | Confirm the heat pump, tank and controller as separate model selections. |
| AquaPlus | APAIO all-in-one range | Confirm the model code and current warranty document. |
Before choosing Haier
- Specify monoblock or split, the model number and the real storage volume.
- Plan airflow, service clearance, drainage and recovery around household demand.
Ask for a complete quote
- Exact model numbers and included components.
- Installation scope, operating assumptions and any exclusions.
- Applicable warranty documents and an itemised rebate calculation where eligible.
From consultation to installation
Designed around your home.
We assess the site and your goals, confirm a suitable configuration, and explain what is included before installation.
Assess
Review your usage, existing equipment, site conditions and priorities.
Specify
Confirm model numbers, compatibility, installation work and the complete quote.
Install and hand over
Complete the agreed installation and commissioning, then explain the controls and support pathway.
Available times
Talk to us about Haier.
Pick a time that works. We’ll assess whether Haier suits your home and confirm the model, installation scope and any applicable incentives.
